Bridgestone In video an old way of how tires were made
In video an old way of how tires were made
2015-12-06
In video an old way of how tires were made

Watch this video it’s about an old school video of how tires are made.

Beads are seated on the drum than the gum strip for inner and we start the inner liner.

Once the first ply is applied, a roller bar is used to keep the inner liner and first ply in contact the second ply is applied.

The beats are seated on the drum, the turn out cycle begins, and the inner liner and ply will be wrapped around the beads.

We started the side walls after the side wall are stitched a roller bar is used to remove any trapped air under the side wall.

The carcus is put on the tread winder, the tread starts in rubber sheet form, and the tread winder applies the tread.

A bladder inflate to push the carcus against, the mold for forming, after the tire has cured it is removed.

Share:
facebook
Twitter
Whatsapp
Print
Bridgestone

Bridgestone
Tires in Lebanon

Bridgestone
Tires in Lebanon

Give your car an instant upgrade with our maximum performance OEM tire.

Bridgestone
Tires in Lebanon

Give your car an instant upgrade with our maximum performance OEM tire.